       |
 |
<< Fuse Selector >>
Fuse Selector
PTP FUSE PRODUCT PAGE
Dimensional Drawing
Part Listing
Time-Current Curves
Specifications
PTP FUSE PRODUCT PAGE
Dimensional Drawing
Part Listing
Time-Current Curves
Specifications
| CATEGORY - ELECTRONIC | ||
| Time-Lag Ceramic Tube Fuse Series | ||
| SIZE: | 3.6X10 |  |
| Body Material: | CERAMIC | |
| Acting: | Time Delay | |
| Axial Leads: | Yes | |
| Printable Version (PDF) | ||
| DIMENSIONAL DRAWING: Back on top... | ||
 | ||
FUSE SPECS:
Back on top...
| Catalogue Number |
Ampere Rating,A |
Voltage, Volt |
Melting I2t, A2Sec |
Approvals |
| PTP.100 | 0.100 | 250 | 0.003 | UL, CSA |
| PTP.125 | 0.125 | 250 | 0.004 | UL, CSA |
| PTP.200 | 0.200 | 250 | 0.011 | UL, CSA |
| PTP.250 | 0.250 | 250 | 0.018 | UL, CSA |
| PTP.300 | 0.300 | 250 | 0.052 | UL, CSA |
| PTP.400 | 0.400 | 250 | 0.152 | UL, CSA |
| PTP.500 | 0.500 | 250 | 0.372 | UL, CSA |
| PTP.600 | 0.600 | 250 | 0.521 | UL, CSA |
| PTP.800 | 0.800 | 250 | 0.854 | UL, CSA |
| PTP001 | 1.000 | 250 | 1.254 | UL, CSA |
| PTP1.50 | 1.500 | 250 | 3.512 | UL, CSA |
| PTP1.60 | 1.600 | 250 | 3.714 | UL, CSA |
| PTP002 | 2.000 | 250 | 6.012 | UL, CSA |
| PTP2.50 | 2.500 | 250 | 8.825 | UL, CSA |
| PTP003 | 3.000 | 250 | 18.908 | UL, CSA |
| PTP004 | 4.000 | 250 | 30.150 | UL, CSA |
| PTP005 | 5.000 | 250 | 53.215 | UL, CSA |
TIME_CURRENT CURVES:
Back on top...
TECHNICAL SPECIFICATIONS:
Back on top...
| Interrupting Ratings |
| 50 amperes at 250V AC |
| Environmental Specification |
| Operating Temperature: |
| -55C to +125C |
| Options: |
| Heat Shrink Tubing (VM-1) over body |
| Physical specifications |
| Materials: |
| Ceramic body / Nickel Brass Caps
Lead Wire: Diameter 0.6 mm 5A and less. Diameter 0.8 mm for rating above 6A to 7A. Diameter 1.0 mm for rating above 8A. |
| Packaging: |
| 1. In Bulk:
1,000 pcs per box 2. On Axial Tape & Reel: 1,500 pcs per reel. 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 56.5mm inside Tape Spacing. |